Have a hardware related problem in your Xiaomi mobile?
Ans. Yes. Then we have the solution to test either it is really a hardware problem or a software is bothering your mobile from working normally.
Ans. No. Then it is the right time to check if your mobile's hardware is working properly. If you found any problem then you can take steps and if your mobile is under the warranty period then certainly you can make use of it.
All you have to do is to make some free time and conduct the following test.
What is CIT test?
It is also called as Engineering mode. Xiaomi Redmi has given a secret settings to test your mobiles hardware.
It will provide the following tests:
- Version Info.
- Keypad
- Back light
- LCD
- TpOpenShort
- TouchPal
- LED Inicator
- Infrared
- Battery
- Vibrator
- Main SIM Card
- Sub SIM Card
- SdCard
- Bluetooth
- Wlan
- OTG
- GPS
- RTC
- Speaker
- Receiver
- Main Mic to Receiver
- Sub Mic to Receiver
- Accelerometer
- Magnetic
- Optical
- Proximity
- Miui Main Camera
- Miui Front Camera
- Flashlight
- HsMic to Headphone
- FM
- Headset
Conduct the test:
At first be sure to take charger(need to turn on in the battery test), have both SIM cards, Sd card, turn on bluetooth, OTG device(if have),and Headphone. No worry if you do not have two SIM card or Sd card or Wlan connection or OTG device. It will only cause the failure of SIM card test,Sd card test, Wlan test and OTG test. And one more thing the Accelerometer test fails most of the time because of not having ideal condition. Read the whole article carefully before starting the test.
So now lets begin!
1.At first open the Setting app and open About phone.
2. Then tap five times on Kernel Version.
Now the CIT Mode has been opened. You can choose the autotest (it will conduct all the tests one by one) or choose the test you wish to conduct and follow the instructions and tasks. If you are facing any problem during the test simply press the power key to exit the test. Ok, now lets do the test yourself.
Feel free to comment for any query or problems you have faced during the test. Tell us if you have any other problems and subscribe to our updates.
Thank You Very Much. Bookmark our page and keep visiting our site for new updates.
Share the post with if you found this post useful.
2. Then tap five times on Kernel Version.
Now the CIT Mode has been opened. You can choose the autotest (it will conduct all the tests one by one) or choose the test you wish to conduct and follow the instructions and tasks. If you are facing any problem during the test simply press the power key to exit the test. Ok, now lets do the test yourself.
Feel free to comment for any query or problems you have faced during the test. Tell us if you have any other problems and subscribe to our updates.
Thank You Very Much. Bookmark our page and keep visiting our site for new updates.
Share the post with if you found this post useful.
